
340W Long Board configuration in a 1.2m x 0.6m (4′ x 2′) tent with added Buddies side-lighting – the perfect fit
THE 600W HPS KILLER!
Featuring a broader UV and Far Red range, 3 umol/j efficiency, chemical and water-proof cables, optional water-resistant LEDs and full plug-and-play convenience, these new High Light 420 kits are the most efficient true full-spectrum LED grow lights on the market with light all the way through the PAR range from 390nm-780nm.
These kits come with Mean Well “A” type drivers with no external dimmer wire, as they are normally used for dedicated flowering where constant dimming is not required. “A” type drivers can still be dimmed using the on-board adjustments and will remain waterproof.
An optional “AB” driver can be ordered with a one-week lead time. External dimmers (1-10V potentiometers) must be ordered separately and are not waterproof: Dimmers
More information on drivers can be found here: All About Drivers
340W kits come in two configurations to suit different grow areas.
Square Configuration (510mm x 480mm)
Perfect for grow areas of up to 1m x 1m. Each kit contains:
2 x High Light 420 LED grow panels (430mm x 205mm) with optional water-resistant coating (see drop-down Menu)
2 x Anodsised aluminium Heatsinks (480mm x 206mm)
2 x Aluminium brackets (480mm x 30mm)
1 x DImmable Mean Well HLG-320-48 A driver (seven-year warranty)
1 x 4.5m German LAPP cable with Italian “Techno” quick-release water-proof connectors
1 x Water-proof double board connector (Techno cable connector with 18AWG hookup wire and TE “SlimSeal” waterproof SMD board connector)
2 x High Light Stainless Hangers
24 x M3 mounting screws
Long Configuration (960mm x 206mm)
Perfect for grow areas of 0.6m x 1.2m, or when paired together 1.2m x 1.2m. Each kit contains:
2 x High Light 420 LED grow panels (430mm x 205mm) with optional water-resistant coating (see drop-down Menu)
1 x Anodsised aluminium Heatsink (960mm x 206mm)
1 x Dimmable Mean Well HLG-320-48 A driver (seven-year warranty)
1 x 4.5m German LAPP cable with Italian “Techno” quick-release water-proof connectors
1 x Water-proof double board connector (Techno cable connector with 18AWG hookup wire and TE “SlimSeal” waterproof SMD board connector)
2 x High Light Stainless Hangers
24 x M3 mounting screws
Minor assembly is required (panel to heatsink; connector to heatsink), but no wiring is needed – all cables are plug-and-play.
340W kits provide around 340W to the boards and will draw around 365w from the wall
If you have any questions or queries about these new boards, please Contact Us