340-470W “Gen2” Driverless Kit

Now with updated High Light 420 “Gen2” LED panels with a choice of 3100K or 3500K

Bring Your Own 320-480W Driver

This double High Light 420 kit includes everything in the 340-470W plug-and-play kits except the driver, but has the correct waterproof connector to make a complete grow light. Cheaper to ship and a great option for those who already own a matching driver or need to purchase one in their own country. Match these kits to Mean Well 320W or 480W drivers (see below) for up to 470W output (500W at the wall).

High Light 420 “Gen2” LED specs click here

Click here for “Square” Board Assembly Instructions
Click here for “Long” Board Assembly Instructions

Each 470W “Square” Driverless Kit comes with
2 x High Light 420 LED “Gen2” grow panels in either 3100K or 3500K with optional water-resistant coating (see drop-down menu)
2 x Anodised aluminium heatsinks (480mm x 206mm)
2 x 480mm aluminium tie-bars (one with 16mm connector mount hole)
2 x Black cable ties
1 x 4.5m German LAPP cable with quick-release male and female waterproof connectors
1 x Dual TE plug splitter (loom) with quick-release female waterproof connector and 16mm locking ring
4 x Stainless 6mm eye bolts (for hangers)
4 x Stainless 6mm x 12mm mushroom head bolts
4 x 6mm washers
12 x 6mm nuts
24 x M3 mounting screws
1 x Techno male connector to suit up to 8.5mm driver cable (suits Mean Well drivers)
2 x High Light Stainless Hangars

Each 470W “Long” Driverless Kit comes with
2 x High Light 420 LED “Gen2” grow panels in either 3100K or 3500K with optional water-resistant coating (see drop-down menu)
1 x Anodised aluminium heatsink (960mm x 206mm)
2 x Black cable ties
1 x 4.5m German LAPP cable with quick-release male and female waterproof connectors
1 x Dual TE plug splitter (loom) with quick-release female waterproof connector and 16mm locking ring
24 x M3 mounting screws
1 x Techno male connector to suit up to 8.5mm driver cable (suits Mean Well drivers)
2 x High Light Stainless Hangars

Minor assembly is required for each kit (panel to heatsink; tie-bars; driver connector). Once driver connector is attached, all cables are plug-and-play.

Drivers

Any 48-54V driver up to 10A maximum current can be used. Each High Light 420 LED board is maximum rated to 5A and will drop around 47V for 235W

110-230V Suitable Mean Well Drivers:
HLG-320H-48 (A, AB or B) for up to 340W
HLG-480H-54 (A, AB or B) for up to 470W
HLG-480H-48 (A, AB or B) for up to 470W *

* This driver must be limited to 10A maximum current as it has the potential to exceed the maximum board rating (5A per board, 10A per pair)

If you have any questions or queries about these new boards, please Contact Us