High Light 420 LED Strips

Ripper Strips

MATCHING PRE-DRILLED T-SLOT EXTRUSION (HEATSINK) NOW AVAILABLE > CLICK HERE

NOTE: These are individual LED strips that must be wired to a driver. They can also be mounted to a heatsink or frame for optimum heat dissipation. All parts needed can be supplied. For ready-to-hang (complete) LED grow lights, please visit our Products Page.

Australian Designed and Made
Up to 3.19 umol/j Efficiency
PAR+ Spectrum – 390-780nm
1% UVA and 10% Far Red
3200K CRI95
Waterproof
Up to 70W each when mounted to a heatsink – up to 30W without heatsinking
Up to 48V@1.44A each
480mm x 50mm x 1.6mm
Single or double wired with heat-proof (130C), chemical-proof 20AWG (0.5mm) wire

3 Year Warranty

The High Light 420 Strip is basically a “true” full spectrum strip version of the High Light 420 Gen3 LED grow panel with added UVA and Far Red.

These strips are design to mount to existing aluminium T-Slot extrusions, which will be sold separately as soon as they are ready.

Each strip is 480mm x 50mm and can be mounted side-by-side or end-to-end in 0.5m-1.0m (or more) lengths.

This modular design is perfect for shelf-lighting, wall lighting, side-lighting, cloning, seed-raising or anywhere else you need a quality, sunlike spectrum for your favourite plants.

Waterproof and easy to wire, they come with a clear conformal coating and pre-wired high-temperature, chemical-proof 20AWG Australian-made connecting wire.

Like our other products, these LED grow strips are designed and made in Australia and use the highest quality components.

Each strip has 108 LEDs – 96x Nichia 3030 (white), 2x Nichia 405nm UVA, 4x 730nm Far Red and 6x 660nm Red – and can be wired in parallel or series.

The colour temperature is slightly higher on these at 3200K to suit ornamentals, shade-plants, leafy greens and edibles typically grown in vertical farms, but are also suited to fruiting and flowering plants. In-house research has found that ~3000K with additional UVA and Far Red light is the best alround spectrum for general growth, fruiting and flowering of most species.

The “High Light 420” series of LED grow lights has been proven around the world to boost yields, essential oils and terpenes – as well as reduce fruiting and flowering times – with enhanced UVA and Far Red light. They cover the entire PAR+ range from 390-780nm and are also super-efficient at up to 3.19 umol/j.

The “sun-like” spectrum also features industry-leading CRI95 colour rendition that is easy on the eyes and does not look out of place indoors. They provide a very crisp “white” light with a very slight pink tinge.

Plants love them! Check out our Instagram Page to see what growers are doing with our products: https://www.instagram.com/growlightsaustralia/

With 108 real top bin LEDs from LED Teknik (Australia’s leading designer of horticultural LEDs) and Nichia Corporation of Japan (manufacturer of the world’s most efficient mid-power and UV LEDs), the High Light 420 spectrum has been refined and engineered to produce the best results with the highest efficiency of any “true” full spectrum grow light on the market.

UVA not only “hardens” indoor plants that would normally be exposed to UV under the sun, it drives secondary metabolite production (essential oils) and root growth, while countering the stretch associated with “shade avoidance”.

While elevated levels of Far Red light can lead to “shade avoidance”, the presence of UVA counters stem stretch while producing larger leaves that facilitate faster photosynthesis. This is separate to the “Emerson Effect” of Far Red that also enhances photosynthesis in the presence of Red light (600-700nm).

Increased Far Red light reduces fruiting and flowering times as it targets the phytochromes (Pr and Pfr) that regulate photomorphogenesis (physical changes to the plant when exposed to different colours, including the Red-to-Far Red ratio).

The high colour rendition of these LED panels (CRI95) is also an important feature, as horticulturalists benefit from seeing their plants in “true” light to ensure they are not suffering from nutrient deficiencies, disease or pests.

Basic Strip Specs
Made in Australia
Single channel, “true” full spectrum (390nm – 780nm) horticultural LED board with added UVA and Far Red
Water-resistant clear coat that transmits an industry-leading 99+% of all light
Pre-wired single or double side

Strip Efficiency
2.89 umol/j at 1.05A (50W)
3.19 umol/j at 250mA (12W)

Board Rating
48V@1.44
70W

Suggested Current
1.05A (50W)

Colour
3200K CRI95

Strip Specs
480mm x 50mm x 1.6mm aluminium PCB
2oz copper
250mm long 20 AWG (0.5mm) chemical and heat-resistant (125C) pre-soldered wires
108 mid-power and high-power LEDs

LEDs
Nichia 757 HT-F1 5000K CRI70 (3030)
Nichia 757 “Vitasolis” 3000K CRI80 (3030)
Nichia 757 GT-V3F1 2700K CRI90 (3030)
Nichia NVSU 405nm UVA (3535)
LED Teknik Custom “Narrow Band” 3000K CRI95 (3030)
LED Teknik Custom “High Efficiency” 660nm monochromatic Deep Red (3535)
LED Teknik Custom “High Efficiency” 730nm monochromatic Far Red (3535)

Suggested Drivers
Grow Lights Australia is an official Mean Well and uPowerTek reseller. We can supply Australian Approved Mean Well and uPowerTek drivers with full warranty to match almost any configuration. Our prices are among the cheapest in Australia. Please Contact Us if you have any questions about drivers.

High Light 420 LED Strips can be driven at up to 70W each when used with a matching heatsink, or 30W each without a heatsink.

Weight	200 g
Dimensions	500 × 50 × 2 mm
Wiring	Single Side, Double Side